CardFittrail-camera SD matrix

Capacity by exact camera

What size SD card does this trail camera support?

Choose the model to see the supported range and any separate recommendation. You do not need to own a card already. Missing lower limits stay unspecified; a capacity answer is not full card compatibility.

Find the model capacity limits

Formatting erases files. Back up first. This tool never reads or formats your card.

Selections stay in this page; no card contents, photos, serial numbers or locations are requested. This is a source-based guide, not a card-health test. Missing facts remain UNKNOWN; capacity-only results are never full compatibility.

SD card sizes by camera model

Maximum capacity and recommended capacity are different. These limits do not confirm card health, speed or complete compatibility.

Tactacam REVEAL Ultra

16GB or 32GB full-size SDHC. The specifications table lists 32GB, while installation also allows 16GB. Class 10 plus U3 and a minimum 90MB/s rating are also required. A capacity match does not verify card health or all recording modes.

Tactacam REVEAL Ultra manual, pp. 2, 4, 7, 10
Checked

SPYPOINT FLEX series

The current quick-start guide specifies microSD from 2GB through 512GB, Class 10 and ultra-high speed. The older support table names SDHC/SDXC; its 2GB boundary is inconsistent with the SDHC standard, so a 2GB card stays UNKNOWN here. A capacity match does not verify card health or all recording modes.

SPYPOINT FLEX series quick-start guide v1.2, pp. 3, 7
Checked

Bushnell Prime L20 119930B

Full-size SD or SDHC, maximum 32GB. No minimum capacity or card speed class is established in the reviewed passages. A capacity match does not verify card health or all recording modes.

Bushnell Prime L20 119930B manual, pp. 7, 14-15
Checked

SPYPOINT LM2

LM2 only: microSD, maximum 32GB, Class 10 and SDHC. The setup page starts at 2GB although SDHC begins above 2GB; that exact boundary remains UNKNOWN. Do not apply this row to LINK or FORCE models. A capacity match does not verify card health or all recording modes.

SPYPOINT LM2 setup guide; LM2 manual p. 8
Checked

Reconyx HyperFire 2

Full-size SD, SDHC or SDXC up to 512GB; no minimum is stated. Class 4, Class 10 and U1 are listed. U3 is explicitly excluded, even on a card also marked Class 10. A capacity match does not verify card health or all recording modes.

Reconyx HyperFire 2 guide, printed pp. 8-9
Checked

Reconyx HyperFire 4K

Full-size SD, SDHC or SDXC up to 1TB. No minimum is stated. The heading also prints “SDUX”; this is not treated as evidence for SDUC. No numeric minimum speed class is given. Recommended: 64GB for still images; high-speed 128GB or 256GB for 4K video. These are not minimum/maximum limits. A capacity match does not verify card health or all recording modes.

Reconyx HyperFire 4K guide, printed p. 8
Checked

A model not listed here stays unknown. Do not transfer a rule to another generation or infer LINK/FORCE support from the LM2 row.